Zkteco Ua300 Factory Reset 【Edge】

Where the "Factory Reset" experience loses points is in the nuance of what actually gets erased.

If the device is connected to a network, you can reset it using ZKTeco ZKTime.Net or similar management software.

Yes. Use . It bypasses all authentication. zkteco ua300 factory reset

A full factory reset (Initialization) is irreversible. Ensure you have backed up your attendance logs and user data to the software first.

Open your ZKTime 5.0 or later software and ensure the is showing as "Connected." Where the "Factory Reset" experience loses points is

Press the tamper switch quickly within 30 seconds of the beep to reset the admin password to the default (typically 1234 or 12345 ). Default/Common Setting Default IP 192.168.1.201 Default Admin ID 8888 Default Password 1234 or 12345

Confirm the operation. The device will typically reboot, and all user data and settings (except for the log) will be cleared. 2. Reset via Software (ZKTime / ZKAccess) Ensure you have backed up your attendance logs

After a successful factory reset, the device typically reverts to the following: Default IP Address 192.168.1.201 Default Admin Password