By mastering the art of manual linking with Xycd60, users can harness the power of this cutting-edge device and take their applications to the next level.

. It acts as a voltage-controlled switch (relay) that protects batteries from overcharging and over-discharging. 1. Key Specifications Voltage Range: DC 6V to 60V. Control Mode: Charging Mode (IN) and Discharging Mode (OUT). HD LCD showing voltage, percentage, and time. Relay Action: Only acts as a switch; it change the voltage or limit current. 2. Mode Selection To switch between Charging and Discharging modes: Long-press the button for about 5 seconds. The screen will display for Charging Mode or for Discharging Mode. 3. Parameter Settings

After extensive research and verification, here are the to get the genuine PDF manual for the XYCD60.

Short press to toggle the relay ON/OFF (emergency stop). Long press to set the LCD backlight behavior (L-P). RoboFactory 2. Setting Parameters Enter Setup: Long press Select Parameter: Short press to cycle through: : Upper limit voltage. : Lower limit voltage. : Conduction/Working time. : Delay on time (0–999 seconds). : Forced on time (Discharge mode only). Adjust Values: buttons to increase/decrease values. Save & Exit: Long press for 5 seconds. Working Logic XY-CD60 Solar Battery Charger Controller Module User Manual