thyssenkrupp Levant (now often marketed as the TK HomeGlide ) is a widely used straight stairlift designed for quick, rail-mounted installation directly onto the stairs rather than the wall. While official installation manuals are typically restricted to certified technicians for safety and warranty purposes, professional resources and user guides provide a clear overview of the setup and top-of-stairs operation. Direct Lifts Australia Installation Overview The Levant is designed for efficiency, often capable of being installed in approximately half a day. Treppenlifto.de Rail Mounting : The aluminum track is screwed directly into the stair treads using mounting brackets. This avoids wall damage and simplifies the process. Drive System : It uses a rack-and-pinion drive system (toothed wheel and rack) for smooth movement. Power Requirements : The system typically plugs into a standard 13-amp household outlet near the staircase. It features a transformer that supplies approximately 27-30V DC to charge the onboard batteries. Battery Backup : Integrated rechargeable batteries ensure the lift remains functional during power outages. Space Requirements : The Levant can be fitted to straight staircases as narrow as 740mm. Screwfix Community Forum Top-of-Stairs Features & Safety The "top" of the installation is critical for user safety during entry and exit. Swivel Seat : To allow safe exit at the top landing, the Levant features a manual swivel handle. Pushing this handle down allows the chair to rotate toward the landing so the user can stand up on solid ground rather than over the stairs. Safety Interlocks : The lift will not operate unless the seat is locked back into its travel position. Charging Contacts : Charging "strips" or contacts are located at both the top and bottom of the rail. The lift must be parked on these contacts to keep the batteries charged. Remote Controls : Wireless "call and send" stations are usually mounted at the top and bottom of the stairs, allowing users to move the lift to their level. Thyssenkrupp levant stair lift brake how to remove?
Thyssenkrupp Levant Stair Lift — Installation Manual (Top-Level Overview) Welcome to the top-level installation guide for the thyssenkrupp Levant stair lift. This concise, user-friendly overview highlights the essential steps, safety checks, and practical tips installers need to set up the Levant quickly, reliably, and with passenger comfort in mind. Before you begin
Verify model & site: Confirm Levant model, right/left rail orientation, staircase measurements, and wall/railing mounting points. Gather tools & parts: Drill, torque wrench, spirit level, tape measure, Allen keys, screwdrivers, mounting brackets, rail sections, carriage assembly, seat, batteries, and all fasteners. Safety first: Turn off power to the area, wear PPE, and ensure the staircase is clear of obstacles.
Key installation stages
Measure and plan
Measure stair run length and rise; mark rail endpoints. Check for obstructions (newel posts, trim, skewed treads) and plan rail bends or site adjustments.
Fit mounting brackets
Position brackets on treads or wall per layout, spacing brackets evenly and aligning vertically. Temporarily bolt brackets; confirm alignment with a spirit level before final torque.
Assemble and place rail
Join rail sections on the floor using supplied connectors; ensure joint seals and alignment pins are engaged. Lift rail onto brackets and loosely secure—final alignment adjustments are easier before full tightening. thyssenkrupp levant stair lift installation manual top
Install carriage and drive
Mount carriage to rail and connect the drive unit per torque specs. Check for smooth manual travel along the rail before connecting power.