Htv 3.7.1 Register !!hot!!

Most consumer-grade remotes will not show you these registers. You need one of the following methods:

: It depends on your license. Basic licenses allow 1 device; family licenses allow up to 5. Check your purchase agreement. Htv 3.7.1 Register

| Register Address | Name | R/W | Description | |----------------|------|-----|-------------| | 0x00 | FIRMWARE_VER | R | Returns 0x0371 for version 3.7.1 | | 0x0B | SIGNAL_LOCK | R | Bit 0 = Tuner lock, Bit 1 = FEC sync | | 0x11 | SNR_DB | R | Signal-to-noise ratio in 0.1 dB steps | | 0x1A | STREAM_SRC | R/W | 0 = RF in, 1 = ASI input, 2 = IP | | 0x23 | PID_FILTER | R/W | Enables advanced PID filtering | | 0x3F | DEMOD_MODE | R/W | 0 = Auto, 1 = DVB-S2, 2 = DVB-T2, 3 = ISDB-T | | 0x7E | FACTORY_RST | W | Write 0xDEAD to restore defaults | Most consumer-grade remotes will not show you these

Here, you will encounter one of three input methods depending on your provider: Check your purchase agreement