Press the soft key, then the PARAM soft key to view the list of system parameters starting from 0000. Essential Common Parameters
– refer to legally obtained copies from an authorized source. Fanuc 10m Parameter Manual
function key (on some units, you may need to press it twice or use the soft keys). Find parameter (bit 0 is the PWE bit). Change the value to . The CNC will trigger a (Parameter Write Enable) alarm, which is normal. Accessing Service Parameters: Once PWE is enabled, press the soft key followed by the soft key to view and edit the main parameter list. 2. Essential RS-232 Communication Parameters Press the soft key, then the PARAM soft
To enable program transfers via RS-232, configure the following "Service Page" and standard parameters: Parameter Recommended Value Description xxx01000 ISO Mode enabled. #0020 2 I/O Channel select (Foreground). #5001 1 Device Select. #5110 3 or 4 Device Type (typically 3 for DC Codes/Xon-Xoff). #5111 1 or 2 Stop Bits (1 or 2 to match PC software). #5112 10 or 11 Baud Rate (10=4800, 11=9600). 3. Machine Accuracy & Compensation Find parameter (bit 0 is the PWE bit)
The Fanuc 10M (Model M for Milling) is a classic, highly reliable CNC system released in the 1980s. Despite its age, thousands of these controllers remain in active service worldwide due to their robust hardware.
Ensures the sending PC and the Fanuc controller are speaking the exact same data protocol.